Tens of thousands of competitors, pages of hard questions and unsatisfied exam preparation situations… Do not worried about all those annoying things! We, help you with your Aruba Certified Mobility Associate (ACMA) V8 May 05,2022 Newest HPE6-A42 vce dumps Implementing Aruba WLAN (IAW) 8 exam. We will assist you clear the Newest HPE6-A42 study guide exam with Aruba Certified Mobility Associate (ACMA) V8 HPE6-A42 vce. We HPE6-A42 new questions are the most comprehensive ones.
We Geekcert has our own expert team. They selected and published the latest HPE6-A42 preparation materials from Official Exam-Center.
The following are the HPE6-A42 free dumps. Go through and check the validity and accuracy of our HPE6-A42 dumps.Do you what to see some samples before HPE6-A42 exam? Check the following HPE6-A42 free dumps or download HPE6-A42 dumps here.
Question 1:
Refer to the exhibit.
An Aruba solution uses AirMatch with the default AirMatch profile settings. A network administrator sees that a scheduled optimization was completed, but a plan was not deployed. Based on the exhibit, why did this occur?
A. The cost of the new plan exceeds the amount allowed by the feature license
B. The new plan did not offer significantly improved quality
C. The solution uses master-local mode
D. ARM is disabled in the radio profile, so AP radios are considered frozen
Correct Answer: B
Question 2:
How can network administrators upgrade AirMatch on an Aruba Mobility Master (MM)?
A. Upgrade Client Match as part of a global software upgrade, and upgrade AirMatch separately as a loadable service module (LSM).
B. Upgrade AirMatch as part of a global software upgrade, and upgrade Client Match separately as a loadable service module (LSM).
C. Upgrade AirMatch and Client Match through a global software upgrade.
D. Upgrade Client Match and AirMacth separetely as a loadable service modules (LSMs).
Correct Answer: D
Question 3:
Refer to the exhibit.
Based on the exhibit, what is the maximum number of APs that this Mobility Master (MM) solution can support?
A. 0
B. 1
C. 32
D. 500
Correct Answer: C
Question 4:
A WLAN in an Aruba Mobility Master (MM)-based solution enforces Enterprise-WPA2 security and uses the tunnel forwarding mode. The company has an external RADIUS server.
Which device exchanges RADIUS packets with the RADIUS server?
A. Mobility Controller (MC)
B. wireless client
C. access point (AP)
D. Mobility Master (MM)
Correct Answer: D
Question 5:
Which task can an Aruba Air Monitor (AM) perform?
A. Analyze wireless traffic patterns at the application level.
B. Optimize RF through the AP channel and transmit power plans.
C. Analyze RF signals to determine the cause of non-802.11 interference.
D. Help to detect rogue APs in the environment.
Correct Answer: D
Question 6:
A Mobility Controller (MC) runs ArubaOS 8. What is a valid reason for an administrator to set the MC to master-local mode?
A. The company already has a partially hierarchical deployment based on the 6.x code and wants to keep the current architecture.
B. The company needs to manage third-party network infrastructure devices with the use of the master controller interface.
C. The company wants a deployment architecture that allows administrators to configure all MC settings from a single location.
D. The company requires a centralized licensing architecture that provides global license pools.
Correct Answer: C
Question 7:
A network administrator wants to use unique digital certificates installed on user devices to authenticate wireless users. Which EAP method should the RADIUS server and clients support?
A. PEAP and MS-CHAPv2
B. EAP-TLS
C. EAP-TTLS and MS-CHAPv2
D. LEAP
Correct Answer: B
Question 8:
A company has an Aruba solution. The company wants to host a guest login portal with this solution, and the login portal must gie guests the option to create their own login accounts.
How can a network administrator help meet these criteria?
A. Choose the Internal captive portal with email registration option for the guest WLAN.
B. Make sure to create a guest provisioning account for the guest WLAN.
C. Disable authentication in the captive portal profile for the guest WLAN.
D. Choose ClearPass or the other external captive portal option for the guest WLAN.
Correct Answer: D
Question 9:
A network administrator needs to configure firewall rules for three roles: Finance Sales Employee
Several rules apply to both the Employee and Sales roles, but not to the Finance role. What is the simplest way to configure these rules?
A. Define the Employee and Sales roles as internal roles, and then configure the rules as global rules for internal users.
B. Apply these rules as a subnet-based policy, and then ensure that only Employee and Sales users are assigned IP addresses in that subnet.
C. Select either the Employee or Sales role, and then configure these rules within the global policy.
D. Create a policy with these rules, and then apply that policy to the Employee and Sales roles.
Correct Answer: D
Question 10:
An Aruba Mobility Master (MM)-based solution has a WLAN that uses WPA2-Enterprise security. A test login on a wireless client fails.
How can a network administrator determine whether the RADIUS server rejected the credentials or another issue occurred?
A. View Technical Support information for the MM.
B. Ping the IP address configured as the RADIUS server.
C. Use the MM AAA Server Test Diagnostic tool.
D. Use the tools in the MM Dashboard > Security window.
Correct Answer: C
Question 11:
Refer to the exhibit.
The exhibit shows output from a Mobility Master (MM) dashboard. What does the health status indicate?
A. It takes the AP about twice as long to send data to the client as expected if all transmissions succeeded.
B. About half of the heartbeats the client sends reaches the Mobility Manager (MM).
C. The maximum data rate that 802.11ac supports is about twice as high as the data rate the client uses.
D. The client device only complies with about half of the rules in the endpoint health policy.
Correct Answer: A
Question 12:
A company has a single Aruba Mobility Master (MM)-based solution with two Mobility Controllers (MCs). Network administrators want APs in building 1 to support a WLAN but do not want APs in building 2 to support the WLAN.
How can administrator ensure that they can enforce this rule as they set up the WLAN in the Mobility Master (MM) Interface?
A. Place APs in different buildings in different AP Groups.
B. Assign APs in different buildings to different MM nodes.
C. Configure APs in different buildings to use different frequency bands.
D. Assign different radio profiles to APs in different buildings.
Correct Answer: A
Question 13:
Refer to the exhibit.
What describes the behavior for this WLAN?
A. APs in the default group broadcast the SSID. Clients can connect to the WLAN on APs in the default group only.
B. No APs broadcast the SSID. Clients cannot connect to the WLAN until administrators activate it.
C. No APs broadcast the SSID. Clients can connect to the WLAN on APs in the default gorup only.
D. APs in the default group broadcast the SSID. Clients can connect to the WLAN on APs in any group.
Correct Answer: C
Question 14:
Which settings can a Mobility Master (MM) deploy to Mobility Controllers (MCs) but master controllers CANNOT deploy to local controllers?
A. radio profiles
B. AAA profiles
C. VLAN settings
D. WLAN settings
Correct Answer: A
Question 15:
A network administrator creates an employee WLAN on an Aruba solution that uses WLAN WPA2-Enterprise security and an external RADIUS server. When the administrator tests the WLAN, the test client receives limited connectivity and cannot access any resources, but the RADIUS server shows that the user authenticated successfully.
What should the administrator check as a possible source of this issue?
A. the connectivity between the AP that the client is associated to and the MC
B. the firewall role and policy that apply to this user
C. the certificate on the RADIUS server
D. the connectivity between the Master Controller (MC) for the client and the RADIUS server
Correct Answer: B