Attention please! Here is the shortcut to pass your Latest DES-1221 QAs exam! Get yourself well prepared for the DCS-IE May 29,2022 Newest DES-1221 exam questions Specialist – Implementation Engineer, PowerStore Solutions exam is really a hard job. But don’t worry! We We, provides the most update DES-1221 exam questions. With We latest DES-1221 new questions, you’ll pass the DCS-IE Latest DES-1221 QAs Specialist – Implementation Engineer, PowerStore Solutions exam in an easy way
We Geekcert has our own expert team. They selected and published the latest DES-1221 preparation materials from Official Exam-Center.
The following are the DES-1221 free dumps. Go through and check the validity and accuracy of our DES-1221 dumps.DES-1221 free dumps are questions from the latest full DES-1221 dumps. Check DES-1221 free questions to get a better understanding of DES-1221 exams.
Question 1:
When planning rack layout, why should base enclosures be grouped together?
A. Power distribution requirements
B. Rack weight balance
C. Ease of cable management
D. Hot aisle requirement
Correct Answer: A
Question 2:
What does the remote replication Failover operation do?
A. Fully synchronizes the source and destination data states and reverses the replication direction
B. Fully synchronizes the source and destination data states and stops the current replication session
C. Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
D. Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
Correct Answer: D
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-25-dae/pwrstr-protect-data/replication?guid=guid-7641aeec-982e-4e4e-85fb-c50f525635dbandlang=en-us
Question 3:
What describes the Import External Storage feature?
A. An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage
B. A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation
C. A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems
D. A native data migration feature of PowerStore that imports external block storage to PowerStore
Correct Answer: D
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external-storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5
Question 4:
While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?
A. Type: Term-Based, Status: Active
B. Status: Perpetual, Type: Open
C. Type: Perpetual, Status: Active
D. Status: Term-Based, Type: Unlimited
Correct Answer: C
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-cfg/validate-the-top-of-rack-tor-switch-versions-and-licensing?guid=guid-40c30b91-7fb2-4a26-bac7-4ae67c07bdfbandlang=en-us
Question 5:
Which IP addresses are required when adding an appliance to the cluster?
A. DNS and NTP
B. Storage and NTP
C. Management and Storage
D. Management and DNS
Correct Answer: C
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-plang/ip-address-requirements-for-initial-configuration?guid=guid-cdb61296-b698-47fb-92ce-284f784cbc2dandlang=en-us
Question 6:
A storage administrator has configured the addition of a VNX2 as a remote system for migration. Which Import External Storage migration feature architectural components are now established?
A. Host iSCSI initiators are registered on the VNX2 storage system
B. Data path and management control path to the source storage system
C. Data path and management control path to the access host
D. Host Fibre Channel initiators are registered on the VNX2 storage system
Correct Answer: D
Question 7:
What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?
A. Examine Fibre Channel zoning
B. Verify host initiators on PowerStore Manager
C. Review Server Manager MPIO properties
D. Use the VNX2 SP ping operation
Correct Answer: C
Question 8:
What is the correct power up sequence for a PowerStore?
A. 1. Base Enclosure Node B, 2. Base Enclosure Node A, 3. Expansion Enclosure
B. 1. Base Enclosure, 2. Expansion Enclosure
C. 1. Base Enclosure Node A, 2. Base Enclosure Node B, 3. Expansion Enclosure
D. 1. Expansion Enclosure, 2. Base Enclosure
Correct Answer: B
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-pwdwn-reboot/power-on-a-powerstore-t-model-appliance?guid=guid-1a60464d-b2e6-45bf-86a1-d5ab5f716361andlang=en-us
Question 9:
Which API does PowerStore use to communicate with ESXi server during vVols provisioning operation?
A. REST
B. SOAP
C. VAAI
D. VASA
Correct Answer: D
Reference: https://volumes.blog/2020/05/06/what-is-powerstore-part-4-vvols/
Question 10:
What is a requirement for the Import External Storage migration feature?
A. PowerStore Global Storage Discovery IP address must be configured
B. PowerPath host-based multipathing software
C. PowerStore LACP bonded ports are tagged for replication
D. Direct Fibre Channel connections between storage systems
Correct Answer: A
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/general-requirements-for-importing-data?guid=guid-3b7c512c-55c4-43cc-9b57-3d22eaa85d5candlang=en-us
Question 11:
A PowerStore T cluster has 3 appliances. Users are unable to access NAS services. What might be the issue?
A. Master appliance is off-line
B. NAS appliance failover is incorrectly configured
C. Trial license is expired
D. Resource balancer service has failed
Correct Answer: B
Question 12:
Which network is used by the PowerStore for communication to the cluster database?
A. inter-node
B. ICM
C. IDN
D. ICD
Correct Answer: A
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000t/pwrstr-ntwk-plang/powerstore-t-model-appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1b
Question 13:
What does the data import session Pause operation do?
A. Deactivates the host to PowerStore control path
B. Stops the source to PowerStore background copy operation
C. Stops the source to PowerStore cutover operation
D. Deactivates the host to PowerStore data path
Correct Answer: B
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/import-workflow?guid=guid-a19dffc3-8def-4a50-a4ed-14650500f567andlang=en-us
Question 14:
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?
A. UDS
B. SMB
C. LDAP
D. NTP
Correct Answer: B
Reference: https://www.dell.com/support/article/en-pk/sln317202/powerstore-alerts-smb-server-alerts?lang=en
Question 15:
What is the logical block size when creating and formatting volumes on PowerStore for Windows hosts?
A. 512 bytes
B. 520 bytes
C. 4096 bytes
D. 64 kilobytes
Correct Answer: A
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-hcg/disk-formatting?guid=guid-27740e37-8432-4241-a3d7-bf18843a94ceandlang=en-us