Do not worry about that if you are stuck in the Network Security Expert Program Newest nse5 vce dumps exam difficulties, We will assist you all your way through the Network Security Expert Program Jun 14,2022 Latest nse5 vce dumps Fortinet Network Security Expert 5 Written Exam (500) exam with the most update Network Security Expert Program nse5 exam questions. We exam nse5 vce are the most comprehensive material, covering every key knowledge of Newest nse5 practice Fortinet Network Security Expert 5 Written Exam (500) exam.
We Geekcert has our own expert team. They selected and published the latest nse5 preparation materials from Official Exam-Center.
The following are the nse5 free dumps. Go through and check the validity and accuracy of our nse5 dumps.If you need to check sample questions of the nse5 free dumps, go through the Q and As from nse5 dumps below.
Question 1:
Which spam filter is not available on a FortiGate device?
A. Sender IP reputation database
B. URLs included in the body of known SPAM messages.
C. Email addresses included in the body of known SPAM messages.
D. Spam object checksums
E. Spam grey listing
Correct Answer: E
Question 2:
In NAT/Route mode when there is no matching firewall policy for traffic to be forwarded by the Firewall, which of the following statements describes the action taken on traffic?
A. The traffic is blocked.
B. The traffic is passed.
C. The traffic is passed and logged.
D. The traffic is blocked and logged.
Correct Answer: A
Question 3:
Which statements are true of Administrative Domains (ADOMs) in FortiAnalyzer? (Choose two.)
A. ADOMs are enabled by default.
B. ADOMs constrain other administrator\’s access privileges to a subset of devices in the device list.
C. Once enabled, the Device Manager, FortiView, Event Management, and Reports tab display per ADOM.
D. All administrators can create ADOMs–not just the admin administrator.
Correct Answer: BC
Question 4:
Examine the following log message for IPS and identify the valid responses below. (Select all that apply.)
2012-07-01 09:54:28 oid=2 log_id=18433 type=ips subtype=anomaly pri=alert vd=root severity=”critical” src=”192.168.3.168″ dst=”192.168.3.170″ src_int=”port2″ serial=0 status=”detected” proto=1 service=”icmp” count=1 attack_name=”icmp_flood” icmp_id=”0xa8a4″ icmp_type=”0x08″ icmp_code=”0x00″ attack_id=16777316 sensor=”1″ ref=”http://www.fortinet.com/ids/VID16777316″ msg=”anomaly: icmp_flood, 51 > threshold 50″
A. The target is 192.168.3.168.
B. The target is 192.168.3.170.
C. The attack was detected and blocked.
D. The attack was detected only.
E. The attack was TCP based.
Correct Answer: BD
Question 5:
Which of the following methods is best suited to changing device level settings on existing and future managed FortiGate devices?
A. Configure each managed FortiGate device and install.
B. Configure using provisioning templates and install.
C. Configure using CLI-only objects and install.
D. Configure a script for these settings and install.
Correct Answer: B
Question 6:
In a High Availability configuration operating in Active-Active mode, which of the following correctly describes the path taken by a load-balanced HTTP session?
A. Request: Internal Host -> Master FG -> Slave FG -> Internet -> Web Server
B. Request: Internal Host -> Master FG -> Slave FG -> Master FG -> Internet -> Web Server
C. Request: Internal Host -> Slave FG -> Internet -> Web Server
D. Request: Internal Host -> Slave FG -> Master FG -> Internet -> Web Server
Correct Answer: A
Question 7:
What is `hot swapping\’?
A. Hot swapping means administrators can configure FortiAnalyzer to write to all hard drives in the device in order to make the array fault tolerant.
B. Hot swapping means administrators can replace a failed disk on devices that support software RAID while the device is still running.
C. Hot swapping means administrators can ensure the parity data of a redundant drive is valid while the device is still running.
D. Hot swapping means administrators can replace a failed disk on devices that support hardware RAID while the device is still running.
Correct Answer: D
Question 8:
Review the CLI configuration below for an IPS sensor and identify the correct statements regarding this configuration from the choices below. (Select all that apply.) config ips sensor edit “LINUX_SERVER” set comment \’\’ set replacemsg-group \’\’ set log enable config entries edit 1 set action default set application all set location server set log enable set log-packet enable set os Linux set protocol all set quarantine none
set severity all set status default next end next end
A. The sensor will log all server attacks for all operating systems.
B. The sensor will include a PCAP file with a trace of the matching packets in the log message of any matched signature.
C. The sensor will match all traffic from the address object “LINUX_SERVER”.
D. The sensor will reset all connections that match these signatures.
E. The sensor only filters which IPS signatures to apply to the selected firewall policy.
Correct Answer: BE
Question 9:
Which permissions can be configured for a `Restricted Admin\’ profile? (Choose three.)
A. Web Filter Profile
B. DLP Profile
C. IPS Sensor
D. Firewall Policy
E. Application Sensor
Correct Answer: ACE
Question 10:
What advantages are there in using a hub-and-spoke IPSec VPN configuration instead of a fully-meshed set of IPSec tunnels? (Select all that apply.)
A. Using a hub and spoke topology is required to achieve full redundancy.
B. Using a hub and spoke topology simplifies configuration.
C. Using a hub and spoke topology provides stronger encryption.
D. Using a hub and spoke topology reduces the number of tunnels.
Correct Answer: BD
Question 11:
Which of the following DLP actions will override any other action?
A. Exempt
B. Quarantine Interface
C. Block
D. None
Correct Answer: A
Question 12:
When configuring FortiGuard on FortiManager, which two statements are correct regarding Allow Push Update settings configured in the FortiGuard Antivirus and IPS Settings? (Choose two.)
A. If an urgent or critical FortiGuard Antivirus and/or IPS update becomes available, the FortiManager built-in FDS will send push update notifications to each managed device.
B. If an urgent or critical FortiGuard Antivirus and/or IPS update becomes available, the FortiManager built-in FDS will receive push update notifications.
C. FortiManager\’s built-in FDS service may not correctly receive push updates if the external facing IP address of any intermediary NAT device is dynamic.
D. FortiManager\’s built-in FDS service does not allow an administrator to override the default FortiManager IP address and port used by the FDN to send update messages.
Correct Answer: BC
Question 13:
An administrator is configuring a DLP rule for FTP traffic. When adding the rule to a DLP sensor, the administrator notes that the Ban Sender action is not available (greyed-out), as shown in the exhibit.
Which of the following is the best explanation for the Ban Sender action NOT being available?
A. The Ban Sender action is never available for FTP traffic.
B. The Ban Sender action needs to be enabled globally for FTP traffic on the FortiGate unit before configuring the sensor.
C. Firewall policy authentication is required before the Ban Sender action becomes available.
D. The Ban Sender action is only available for known domains. No domains have yet been added to the domain list.
Correct Answer: A
Question 14:
Which of the following tasks fall under the responsibility of the SSL proxy in a typical HTTPS connection? (Select all that apply.)
A. The web client SSL handshake.
B. The web server SSL handshake.
C. File buffering.
D. Communication with the urlfilter process.
Correct Answer: AB
Question 15:
On the Device Manager tab, what does a red circle in the Logs field of a device indicate?
A. A red circle indicates logs are being received.
B. A red circle indicates the IPSec tunnel is down.
C. A red circle indicates logs are not being received.
D. A red circle indicates no recent logs have been received.
Correct Answer: D